The first, and most important step to bonding multiple pieces of foam is selecting the right bonding agent. For open-cell comfort foam, this is spray adhesive. In a spray form,Marz Sleep Spray Reviews adhesive creates flexible bonds that you need in products you sit, sleep, and move on. Spray adhesive can also evenly coat surfaces without creating the hard areas pastes generate. It is very important to check with a retailer to ensure the adhesive you plan to use is safe for the type of foam you will be working with. Some spray adhesives are ineffective at bonding certain types of foam, and some can even cause damage to a foam product.
After selecting the correct adhesive and pre-cutting the foam sections you plan to bond, prepare a work surface; either a work bench you don't mind getting dirty, or a table/floor adequately protected with newspaper or drop cloths to catch any adhesive over-spray. Once you've set up your work station, stack the two pieces of foam on top of each other with the sections to be bonded facing out at you. You can also place them side-by-side with the sections to be bonded facing upward if you would be more comfortable that way.
Liberally spray the adhesive across the foam faces, taking care to not saturate the foam while covering both sections evenly. It's important to spray both pieces of your cushion at the same time to ensure balanced curing of the adhesive. http://centumentltdreview.com/marz-labs-sleep-spray-review/ Allow the glue 10 to 15 seconds to become tacky and carefully position the foam pieces so the two glue-coated sections are facing each other. Carefully position the two sections about a half inch from each other, so you can ensure they are aligned properly.
