Installation cost labor costs, noise, the installation of wood flooring prone to many problems. Single-layer solid wood flooring complaints most content is tile deformation,recycled rubber sut to fit pool surround dry cracks, walking noise. The use of single-layer solid wood flooring tile deformation phenomenon are mostly in the hall there, why happens in the hall instead of appearing in the bedroom or less? Why the completion of a few years the house, the old floor of the building will also appear tiles plate deformation phenomenon? Why lay a layer of plastic film or a layer of moisture-proof membrane will appear tiles deformation phenomenon?
Most people are puzzled. The use of wood flooring tiles deformation phenomenon is mainly due to the surface coating of multi-layer paint has been closed to the fiber of wood, multi-layer film has a certain hardness on the surface to produce a stable tension, the end of the plate absorb moisture expansion ,wood plastic composite cladding prices The board size does not change and produce. New delivery of the use of residential walls, floor moisture content of 30% or more, that is, to pay a number of years of housing people often can not live, doors and windows closed buildings moisture content is difficult to come down, when the dry wood flooring (Moisture? %) Plate bottom moisture absorption expansion plate will become tiles, nails can not prevent this deformation. When the building gradually reduce the moisture content of less than 8%, the wooden wedges, keel will shrinkage loose, keel will be deformed.
Loosening between them produce a gap between the deformation, when people move around will produce noise, which is unavoidable. Whether the new building or the old building, the Office of serious plate tiles deformation reasons: the process of interior decoration, bathroom, kitchen tiles, floor tiles, to the Office of ash, a lot of water into the floor, the wind A blow to the surface like a dry, the actual floor there are a lot of water inside. When the wood floor paved,deck veneer lowes the potential floor of a large number of moisture ** dry floor of the floor to absorb, so that the bottom plate expansion caused by plate deformation. Although some people in the ground layer of plastic film or foam film, if the film has holes in the ground surface of the water will continue into the membrane, especially around the membrane does not turn to the board pressure in the skirting board, the wall and the environment Water will expand from the floor around the expansion joints into the bottom plate. Because the ground has a layer of moisture into the bottom of the plate instead of the water distribution does not go out, only ** dry wood floor absorption caused by plate deformation.
In particular, single-layer solid wood flooring has not been scientifically dry manufacturing, deformation phenomenon is not strange. Shrinkage crack is true, the market's popular single-layer solid wood flooring moisture content can meet the basic state standards, the use of single-layer solid wood flooring shrinkage cracks, deformation of the tile manufacturers will not bear any responsibility. To install the solid wood floor to reduce the quality of the problem should not be used keel fixed wood flooring, polystyrene extruded insulation board should be better than wood keel, pavement is not simple nail keel,list of composite vinyl deck manufacturers insulation, warm, cool, moisture, Rot, good elasticity. But should use scientific, practical and strong swept the world of solid wood flooring, can demonstrate your smart move without worries. In particular, the project, fine decoration of the designers should pay attention to this.
