In order to achieve our performance we will use a small roller in road paving, since the variable speed of small roller we need to debug,Cement Road Transverse Approach today we will help you to know how to debug a small roller.
No need to charge during debugging, but must be guided by the guide plate to raise the screw, and then press the jog mode hit the hammer slowly adjusted to the lower dead point,Super Practical Road Trowel Equipment and particular attention must be guide plate,can not be pressed float rod too low, otherwise it will cause the float rod bent or broken. When you start stamping presses, it must be clockwise adjustment screw feeder speed, slower movement of the slider, so that it can come to see whether the length of nylon washers and screws to fine-tune slider to reciprocate.
When the slider reciprocates test machine, if not met only nylon washers length fine adjustment screw,there is a floating arm will be lowered enough, which need to punch down slowly to the guide screws. If you move the slider back and forth,Compactor roller metal leveling machine only met length fine adjustment screw does not touch nylon pads, which is a floating arm is lowered too, need to punch guide screws slowly to increase.
Doan machinery hope the above description can help you to use a small roller,our company is a professional manufacturer of small roller,efficient asphalt road sealing machine the company since its inception has accumulated a wealth of experience and expertise, you are welcome to purchase.
