Any problems you discover along with your roof should really be repaired right away. Even a small issue can cause big, costly problems if left unresolved. When you have a hammer, pry bar, galvanized roofing nails, roofing cement and some spare shingles you may make temporary repairs to your roof. If your roof in shingled, make sure to tuck the edges of the brand new shingles or patches underneath the row above. Overlapping the shingles this way sheds water in a downward direction.

Repairing Torn and Bent Shingles 

To make temporary repairs to shingles that are damaged due to wind, glue down both parties of the torn area with roofing cement. Tack down the sides with nails and apply cement on the nails. For extra strength you can put cement of the nail before hammering the nail into the roof. You can also use this technique if your shingles are bent. Be sure to only manipulate your shingles on warm days when they're more malleable.

Repairing Built-Up Roofs 

Over the years, blisters sometimes form on developed roofs. Blisters form from moisture being trapped under a level of the roof expanding because it's heated forming bubbles. The blisters must be "popped" so that the layer of roofing could be flattened and resealed to make sure that the roof won't leak. To begin this repair, slice the blister with a power knife carefully so that you don't damage the layers underneath. Allow time for the moisture under the blister to dry. Once the moisture has dried, apply a heavy layer of roofing cement to the area. Move the cement around the region such that it is worked under the edges. Nail the patch set up by placing a nail every 2 inches along the surface of the patch. The patch must be made out of 90 pound roofing paper and it must be 3 inches larger than the region you are patching. After you nail the patch onto the location, cover it with roofing cement to secure it. The patch ought to be left to dry for a number of days and then you definitely should re-apply gravel to the area. Pour roofing tar on the patch and apply gravel about it so that it matches the remaining roof. The gravel protects the surface of the roof from the run and moisture.

Repairing a Flat Roof 

Old roofing, popped nails and separated seams are common problems to locate on an appartment roof. Standing water on these roofs often causes leaking. Flat roofs are an easy task to focus on due to their insufficient pitch however, water can quickly find any gaps in patches made on flat roofs. Patches can act as a dam creating a trickle prone pool of water in a currently compromised area. Be sure to carefully fill gaps while keeping the profile of the patch as smooth as you can possibly make it.

Click here : http://www.surreyroofing.org/