Solid wood flooring as if you are back to that full of green forests, vibrant, enjoy the foot and floor ensemble melody, but behind all the good, such as selection and laying properly, How to build DIY wpc flooring there will be some "common diseases", such as insects , Pa Pa, sound, dirty board, painted face, from the drums and Qiao Qiao, the following for these "disease" talk about the diagnosis and treatment methods. Solid wood flooring solutions to a variety of problems.
First, the moth-eaten, because the wood insect bite, the floor surface often can see a pile of bunch of powder, annoying. The reason, and the selection of the floor. In order to prevent the moth-eaten, one is to buy through the drying kiln steaming process to produce the floor, even though the price is more expensive,A New Outdoor Decking Material- WPCbut the wood eggs have all killed; the second is carefully selected keel, any insect or bark , All do not. Second, Pa Gou, and some shop floor a few days, there will be a large gap between the slats. This is mostly with the floor before the water content is too high, due to indoor high temperature or air-drying and contraction. Note that the moisture content of the floor before laying should be in the range of 8% -13%, and after the shop to be timely oiling.
Third, the sound, because the quality of the floor laying is not high, people will move around in the issue of crunching sound, after hearing very uncomfortable. To this end, pay attention to the keel and the ground,Waterproof wood-plastic composite flooring between the floor and the keel solid, with the number and length of the appropriate nails. At the same time, to prevent the keel spacing is too large or too high water content, or laying loose after drying shrinkage will also cause some impact. Fourth, the dirty board, referring to some of the floor paint, gives an unclean "gray" feeling, and some even clearly visible footprints. To prevent this from happening, it is important to keep the plate clean after the sanding. 5, painted face, using the same species of lath, the color will appear larger differences.
If the laying of improper, it is easy to show a "painted face." In the use of lacquer wood flooring laying, especially the great color of wood slats, you should consider the selection and deployment of slats, so that the color of the floor from shallow to deep, or gradually deep into the shallow transition. 6, from the drum,Wood Plastic Floor Into The Golden Period and some floors in the shop finished, damp expansion and the emergence of drums. This is mostly around the floor with the environment, especially the foundation is too influx of water or a relationship with the floor. To ensure that the floor can not afford to drum, pay attention to three points: First, the end of civil engineering, can not immediately laying solid wood flooring; Second, if the bedroom in a humid environment, to lay moistureproof floor is appropriate; Of the water content can not be less than 6%. Seven, Qiao Qiao, this is mainly because the solid wood floor has not been caused by the formal drying process.
