For security reasons, the machine is no vibration function when it is "precision walking" mode. When the small roller start to vibration, along with the pulley vibration vibrator.Road Router Crack This vibration increases compaction force from the vibration machine to pavement material . The vibration amplitude can have two options and the choice of different amplitudes corresponding to different vibration frequencies.
Vibration system is controlled by the SAAO system to obtain stable vibration frequency. Vibration frequency is controlled by the trimming switch setting. If the external causes change in the engine speed,Slot machine parts and maintenance technology control system will be calculated and compensated to obtain stable vibration frequency.
Walking with a vibration process should note the following.1、Not open the vibration nearby buildings and bridges, which might cause damage to these facilities.
2、Before opening vibration, make sure there is no underground pipelines,professional blacktop sealer supplier such as water, gas, cable and sewage pipes, etc. These facilities can also be easily damaged or cause an explosion by vibrations.
3、Since drum of steel wheel will reduce adhesion to the ground, mechanical slip may occur even tipping during the process through the hard ground or ramps.
4、When you need a large amount of compaction in earthworks,professional asphalt joint heater supplier the machine should be at a slower pace and an appropriate frequency to compact material.
