Sealant is A, B two-component epoxy-modified low-viscosity liquid adhesive, with character of low viscosity, strong penetration, can be injected into width at 0.1mm micro-cracks, anti-aging,Road Router Crack anti-media (acids, alkalis, water) good performance, a wide range, operational for a long time, does not contain volatile solvents, no shrinkage during curing, toughness and excellent impact resistance and other characteristics.
1.FeaturesA.Low viscosity, strong penetration , capable of repairing the micro-cracks at 0.1mm width .
B. Not contain volatile solvents, does not shrink when hardened.
C. Excellent toughness and impact resistance after curing.
D. Wider proportion of A and B glue preparation , and wide curing with long operating time.
E. Anti-aging, anti-media (acids, alkalis, water) and good performance.
2. Scope of application1)Concrete bridges, housing, water,Excellent asphalt distributor trucks stockists roads and other projects of injection crack repair.
2)Concrete, brick slit member perfusion bonding,play the roles in repairing and reinforcing.
3)Concrete internal defects (cellular, loose) dispensing to repair.
3. Technical parametersAppearance Colloidal performance Bonding capacity Operating performance.
4. Operation points1)Construction environment dry and ventilated, paste face clean,thoroughly polished rough.
2) It must be tested accordance to the modulation gum environment, temperature and process conditions prior to ensure the best ratio.
3)The curing adhesive temperature can not be below 5 ° C,cured time can not be less than 3days when environment temperature of 20-25 ° C ,Top Rated road equipment can not be less than 7 days when the environment temperature is below 10 ° C.
4)It is better to be mixed by machine to ensure the homogeneous mixing of A and B.
5. Packing,transportation, storage, securityM1) Packed by plastic bucket, A material should be 17.7KG/bucket, and B material should be 2.3kg/bucket.
2) This product is not a toxic, flammable, explosive dangerous goods, can be transited by general chemical building materials. Transit stacked no more than three layers can not be tilted or upside down, can not sunlight, rain, etc.
3) A and B should be stored separated at dry warehouse,（5-35°C）、the storage time can not be exceed 12 months.
4) It is must to be required to wear protective equipment (gloves, masks, goggles, helmets, etc.) , if accidentally gets on your skin or clothing, can be washed and rinsed with plenty of water, if splashed into the eyes, seek immediate medical attention.
