No matter how good the purchase of solid wood flooring, there is no correct laying is wasted. For the decoration of the knowledge, not to master, know that some are always good, the following Xiaobian to say that the solid wood floor keel laying method! The keel laying is the most traditional floor, the most extensive laying method,wpc garden decking we have to understand the laying of keel Method of the specific circumstances. Keel laying method features a rectangular long wood as the material, fixed and bearing the floor surface layer to withstand the force and laying way according to a certain distance. Any level of the floor, as long as there is sufficient bending strength, can be used to play the keel laying method, so there are many keel material, the most widely used wood keel, the other plastic keel, aluminum keel and so on.
Scope, keel pavement suitable for solid wood flooring and parquet, the floor of the bending strength is enough, you can use the keel pavement. Pavement method, 1, the laying of the keel, the ground line: according to the direction and length of the laying of the floor, the laying of keel position. Each floor at least put on the three keel, wpc patio decking the general spacing of not more than 350mm. Wood keel fixed: According to the actual situation of the ground hammer to determine the location and pitch. 2) If the ground leveling layer, the hammer drill method, the general hammer into the depth of about 25mm or more, if the use of fire through the wood keel into the concrete, the depth must be greater than 15mm, when the ground height difference is too large.
Should be leveling the mat, first with the nail to the mattress fixed to the concrete base, and then iron will be fixed to the wood keel wood. 3) Note: between the keel, the keel and the wall or other materials should be set aside between 5-10mm, keel end should be nailed. 4) Wood keel leveling: After laying the wooden keel to conduct a comprehensive flatness of the cable and the firmness of inspection, testing before passing the laying. 5) If the ground under the water pipes or ground heating and other facilities, do not drill, the general suspension can be laid, in case of keel laying, teak boat decking can be used steel, aluminum keel and other new keel, or use adhesive Short wooden keel.
2, the laying of the floor, the floor surface laying laying is generally dislocation, from the wall side to leave a gap of 8-10mm, the laying of the first row of wood flooring, floor convex corner to screw nails, nails to fix the floor Wood keel, after the row by row block nails. Each floor where the wood keel contact with the site, must use air gun nails, screw nails or nail nail people to 45 degrees -60 degrees oblique nail, nail length of not less than 25mm. To make the wooden floor even,balcony wpc flooring should be 3-5 per floor flooring, that is, pull a straight line, check the floor is flat, in order to facilitate timely adjustment. The mounting of the coupling and the skirting board is the same as for the suspension method.
