Warm heat is transferred through the wooden floor to the surface, there must be heat loss, ideal flooring can minimize these losses. The floor should be how to buy geothermal heat resistance and moisture it stronger:? Requirements for wood to warm the floor of particularly stringent, and the wood is specially treated,plastic wood composite material market even if it is immersed in 100 degree water will not crack, unglued, deformation and warped due to warm the floor planks for long periods in high temperature environments.
so the environmental protection requirements are also requirements, formaldehyde emission requirements must meet international standards, or baked in a high temperature more easily than ordinary sheet the release of toxic substances out. Material stability is better: to heat the floor using a complex environment,picket fence malaysia the non-heating season ground to withstand moisture, while heating surface temperature suddenly rises again, the floor will inevitably bear the "temperature", double change "humidity" in. So geothermal floor must buy the material good stability. In general, the smaller the thickness of the wood floor, the greater the heat flow. Wood floor thickness 6.5-8.5 mm to ensure that the wooden floor with good breathability and heat dissipation. But the impact of the wooden floor thickness of the heat conduction is not great. B
ut the temperature rises, the wood flooring formaldehyde release rate accelerates, should try to choose low formaldehyde emission wood floors. It depends on the density floor substrate and internal bond strength, higher internal bond strength, indicating that the floor withstand temperature changes in the ability to better the cracking phenomenon will not occur, only the substrate is relatively dense wood floor, curved wooden benches up against a wooden fence in order to ensure long-term does not crack under high temperature deformation. That fear humid environments thickness swelling.
Hot water floor radiant heating floor in a high humidity state requirements for small changes in size, expansion rate is less than or equal to 2.5%. In general, the smaller the expansion, moisture resistant wood floor as possible. Requirements under conditions of prolonged heating, formaldehyde emission is not exceeded. When consumers choose to heat the floor, be sure to choose low formaldehyde content of the floor as possible, because the higher the temperature, the more formaldehyde emission,install vinyl privacy fence panelsin a relatively closed room, plus an indoor formaldehyde caused by the release of other items, indoor formaldehyde It may be exceeded, cause harm to humans.
