How to pave the marble, granite surface Marble and granite pasta should be made of natural marble plate and granite sheet. The surface of the board requires bright and bright, bright color, no knife marks, spin pattern. Before the laying of the plate, according to the design requirements, according to the stone color, pattern, pattern, texture and other test number; when the plate wood fence plans cracks, horns, warping and surface defects should be removed, different varieties of plates may not be mixed use. Paving sheet, should be in the grass-roots level (cushion level or floor) on the vertical and horizontal line, the line is generally taken from the edge of a sheet of material from the wall width.

Marble, granite slabs should be wet with water, to be wiped or dry surface before being laid. Marble, granite sheet laying should start from the line, that is, this line of board side alignment. When the plate is laid, the binding layer should be paved at design composite deck in Iran the grass-roots level. When the cement-sand combination layer is used, it should be dry and evenly sprinkled. When the cement mortar is used, it should be dry hard cement mortar. In order to enhance the bonding layer and the plate bonding, in the bonding layer should be applied with cement slurry or dry shop water sprinkler, then the plate alignment position on the bonding layer.

The first line laying by the line, after the line according to the previous line laying. Paving the plate should be smooth, straight lines, mosaic correct; plate, sheet and the combination of layers and corners, trim and the wall should be tightly packed, no gaps. Marble, granite surface of the surface should be clean, smooth, solid; plate patchwork bathroom walls panel south africa width when the design is not specified should not be greater than 1mm. Marble, granite surface should be protected after completion, to be combined with the strength of the cement mortar to meet the requirements before the wax to achieve smooth and clean.

Natural marble layer can also be used to fight pieces, that is, with marble pieces of puzzle. Requires the use of color coordination, the thickness of the same, without sharp corners of the marble fragments, the combination of the application of cement mortar, the gap between the fragments should be used cement mortar or cement and stone particles to fill the mixture. The surface of the marble surface should be clean, smooth, solid; fragment color with coordination; fragment between plastic wood panels price in York the gaps to fill the dense, no gap phenomenon.