the flatness of the drilling line, installation wire steeve, ensure the reasonable density of keel installation. Look at the following ecological wooden ceiling installation notes.     1, carefully measure the length of each side of the ecological wood ceiling, according to the design of the shape, detailed calculation of ecological wood dismantling size, as well as the keel density. 2, the level make level,

repeated 2 times to check the flatness of the mark pop-up base line, it is the same with the smallpox of aluminous gusset plate of the installation process, need to play the line processing, in order to ensure the orderly progress of subsequent installation. 3, the material size is correct, fine interception of ecological wood and light steel keel. 4, analysis of pre design core support, and design of hanging line location,

reasonable and uniform allocation of ecological wood ceiling weight, increase the ceiling ceiling life, main reinforcement of not less than 30 x 50 wooden keel or 6-10 galvanized hanging wire.     5, according to the projections, drilling line, installation wire steeve. 6, place the keel, and pay attention to the ceiling design, avoid the next link to bring trouble. General use of light steel keel, to do rust

treatment. Keel leveling. 7, to ensure that the keel installation density is reasonable, there is no inclination of the case, the installation of the base plate, the base plate is generally recommended with 5mm multilayer board or nine plywood, fixed firm. 8, ready to use the hardware installation has been prepared by the ecological wooden ceiling.     conclusion: the above is a note. Xiaobian introduce ecological wood ceiling installation, I hope to help you. Learn more knowledge of building materials, welcome attention to the house decoration network.

patio sets for composite decking
durable composite wood wall cladding
decking materials plastic joists