Construction Process of External Insulation of Polystyrene Insulation Board The use of polystyrene insulation board material density is small, low thermal conductivity, can be arbitrarily cut into various shapes of the characteristics of the building in the outer surface of the building with some or all sticky nail polystyrene insulation board plus surface method, To carry out pcv fencing recyclable the building insulation and decoration. This construction method is to absorb the advanced experience of foreign countries, combined with China's national conditions, through engineering practice, summed up the study. The use of this method for building exterior insulation can greatly reduce the wall thickness.

reduce the wall weight, effectively eliminate the thermal bridge, thereby enhancing the building insulation and thermal storage performance, reduce the building heating energy consumption. Polystyrene insulation board can be based on the needs building a 21 round pool deck South Africa of architectural design in the field cut into a variety of decorative line angle or stigma and other accessories, the use of this method for construction and installation. Scope: all kinds of new or built public and civil buildings.

light industrial plant, the external walls of solid brick walls, stone walls, concrete walls or other solid foundation with the walls, are suitable for doing polystyrene insulation board External insulation. This method is also applicable to the building wall insulation. Construction process: first clean the roof, so that the roof to be built without floating soil, grease, stolen goods, Caitu, wax coating, surface repair formation. Watering wet wall, paste the polystyrene insulation board, each rustic beam composite piece of polystyrene insulation board middle nail an expansion bolt, bolt into the wall 40-50cm is appropriate. With fine linen wood trowel in the polystyrene insulation board surface sweeping, leveling, cleaning the polystyrene insulation board debris.