to the line block on the wall or pre built into the brick wooden peg. Brick (or wooden peg) position should be consistent with the keel sub file size. Block spacing, anyway, generally not more than 400mm, such as position can be set up for nog. 2, whether the panel shall log or plywood, the selection of colors, patterns of approximation used in the same room; installation panels, wood should be placed inside

the convex ring, adjacent panel wood and the color should be similar. 3, install wooden keel. Full height panels should be based on the four corner of the room and the upper and lower keel straight, leveling, first find the block size according to the panel from top to bottom to standard wood bars, and then in the inner space according to the design requirements of nail horizontal and vertical keel, keel straight first,

then loaded transverse keel. 4, when the cutting plate is slightly larger than the actual size of the keel frame, large net sign, small plane straight, tree roots downward, the length direction of the need for docking, the pattern should be smooth, the joint position should avoid the sight head, wood panel seam general from the ground below 1.2M. At the same time, the joint must be positioned on the transverse

patio flooring options over composite diy
outdoor wood banisters and stair railing install
clear plastic vinyl patio curtains uk only