Low elongation and high elongation of the two different paint Low elongation products Unlike high elongation products, these products have two continuous phases, namely, polymers and cement. As the proportion of powder increases, if you continue to Wood Polymer Composite Decking UAE use the finer powder material, the specific surface area of ??the feed is too large.

Therefore, the powder in the fine aggregate should have a certain level: the proportion of powder increases, such paint products in the film after the performance is also different, mainly in the following strength.

As the proportion of cement in the total ratio increases, so the drying time of Deck WPC Dealer Oro ROR Manufacture China the coating is shortened, even if the environment is relatively humid, can also be film. As the cement content is high, the rigidity of the coating also increases, although there are -, the flexibility, generally can not pass the usual low temperature flexibility test.

In general, compared with the type I products, the second type of product due to the reduction of polymer content, the material Fencing Pricing Installed Per Foot elongation is significantly reduced. As the rigidity of the material increases, the bond strength increases and the creep is reduced, and the effect of the back surface is better, especially when the water pressure is high. As the rigidity of the material increases, the coating after film, there is Wood Plastic Fence, Wood Plastic Composite Supplier - Shanghai Seven Trust a good anti-puncture, wear resistance, so as the ground under the waterproof, backfill will not damage.