?In the irrigation before the cracks in the cracks in the cracks. Gas heating pipe filling machine works: Gas filling machine is mainly hand-push + hand-held irrigation pipe operation, for the filling machine melt box smaller models. At work, first in the box by adding asphalt or pouring glue to one-third, ignite the furnace stove (through the roasted guns can not be lit directly with the fire if the combustion chamber has a certain liquefied gas on the danger) , After the ignition to adjust the flame to the best combustion flame, then melt the oil tank began to heat up the temperature, the temperature can be observed by watching the thermometer at a glance. The elution time is about 90 minutes. According to the melting temperature of the filling material, adjust the size of the flame. After about 30 minutes of soldering, start the generator and open the power switch of the discharge pipe to give the tube to heat (about 40 minutes). After the material melts, the discharge pipe temperature can reach the job. No hand-filled irrigation pipe to promote the filling and filling machine to make the right side of the mouth for the supply of cracks in the irrigation joints; hand-filled irrigation pipe with the irrigation pipe is the right seam crack treatment. In the course of work at any time to add material to ensure the continuity of work. Asphalt pump discharge flow adjustable. complete specifications of road maintenance machinery pothole patcher road making hot regeneration truck infrared asphalt repair technology enables city cimline crack sealing equipment